This site has limited support for your browser. We recommend switching to Edge, Chrome, Safari, or Firefox.

Recipe #4: Rosy

Recipe #4: Rosy

This luxury layered candle blends the delicate elegance of a rose garden with the depth of sea salt and plum, unfolding in three distinct layers. As the candle burns, it reveals a sophisticated progression of scent, transitioning from deep, sultry base notes to airy florals.

Fragrance Story

  • Bottom Layer: A rich, grounding base of plum, warm vanilla, and exotic cardamom.
  • Middle Layer: A harmonious bridge between deep and fresh notes, softening the transition.
  • Top Layer: A fresh floral opening, featuring delicate rose petals, green leaves, and musky accords.

Core Materials 

  • Wax: Soy wax (or soy/paraffin blend suitable for layering)
  • Three heat-safe pouring pitchers
  • Thermometer
  • Scale
  • Three containers for color mixing
  • Candle jar (12 oz recommended)
  • Wick (CD-18, ECO-10, or HPSP-76 based on jar diameter and wax type)
  • Wick holder/centering device

Colorants

Total wax weight: 10.5 oz (to account for vessel headspace)

Fragrance load: 8% (confirm wax compatibility)

  • Bottom Layer Sea Salt & Plum fragrance oil 0.36 oz (10.8 ml) and 4.5 oz wax
  • Middle Layer (Transition) – Blushing Rose fragrance oil 60% (4.32 ml) blended with Sea Salt & Plum 40% (2.88 ml), and,  3 oz wax
  • Top Layer Fresh Rose fragrance oil 0.24 oz (7.2 ml), and, 3 oz wax

Instructions

1. Preparation
Secure the wick in the center of the jar.
Pre-heat the wax container to 185°F to reduce air bubbles.
Prepare three separate pouring pitchers for each layer.

2. Layering

Bottom Layer (Sea Salt & Plum)

Heat 4.5 oz of wax to 185°F. Add deep purple/plum dye at 185°F. Cool to 175°F and add fragrance blend. Pour at 160-165°F into the jar. Allow to cool until the surface is firm but slightly tacky (around 30-45 minutes or 110-120°F). Score the surface gently with a toothpick or skewer before adding the next layer to improve adhesion.

Middle Layer (Transition)

Heat 3 oz of wax to 185°F. Add soft pink dye at 185°F. Cool to 175°F and add blended fragrance. Pour at 155-160°F over the slightly tacky bottom layer. Allow to cool until the top is firm but slightly tacky (30-45 minutes, 110-120°F). Score the surface gently before adding the next layer to improve adhesion.

Top Layer (Blushing Rose)

Heat 3 oz of wax to 185°F. Add light rose pink dye at 185°F. Cool to 175°F and add fragrance blend. Pour at 155-160°F over the middle layer. Allow the candle to cool completely (4-6 hours).

3. Curing

Let the candle cure for at least 1-2 weeks before burning for optimal scent throw. Store the candle in a cool, dark place during curing.

Additional Notes & Burn Optimization

  • Layer Adhesion Improvement:
  • Scoring the surface before each layer helps prevent separation.
  • Pouring the middle and top layers at 155-160°F reduces shrinkage and adhesion issues.

Wick Selection:

  • For 100% soy wax: ECO-10 or HPSP-76 is recommended.
  • For a soy/paraffin blend: CD-18 or CD-16 may work better.
  • Test burn before finalizing the wick size!

Test Burn Recommendations:

1. First burn: After 24 hours (not immediately after curing).
2. Burn for 4-hour intervals to ensure even wax pool formation.
3. If tunneling occurs: Use a slightly larger wick.
4. If excessive soot or high flame: Use a slightly smaller wick.

Expected Results

A visually stunning candle with a gradient from deep purple to soft pink. Burn time: 60-70 hours in 4-hour increments.

 

Cart

Congratulations! Your order qualifies for free shipping You are $99 away from free shipping.
No more products available for purchase

Your Cart is Empty